Manufacturing & process
Industrial IoT for Pharmaceuticals
LoRaWAN sensors, gateways and dashboards for Pharmaceuticals & life sciences — specified, stocked and supported by UK engineers.
Industrial IoT for Pharmaceuticals replaces manual rounds, spreadsheets and blind spots with live LoRaWAN telemetry: low-power sensors, resilient gateways and dashboards that flag a problem the hour it happens, not the week after. Indiott specifies, stocks and supports the full stack and ships across the UK from local warehouses.
UK life sciences is one of the country's largest research-intensive sectors, spanning biopharmaceutical manufacturing, MedTech and a dense distribution network, all overseen by the MHRA. Manufacturing and distribution run to Good Manufacturing Practice and Good Distribution Practice, so environmental conditions in cleanrooms, stores and cold chain are not just quality matters but licence conditions. Continuous, tamper-evident environmental data is now a routine part of demonstrating control to an inspector.
Industrial IoT for Pharmaceuticals: sensors, gateways and dashboards
Built for GMP manufacturing and facilities engineers, GDP responsible persons and qualified persons, Cleanroom, validation and qualification managers, Cold chain and warehouse distribution teams and Quality assurance and quality control staff. Every asset that fails quietly — a pump, a chiller, a cold store, a plant room — is a candidate for a battery LoRaWAN sensor reporting to one dashboard. Typical Industrial IoT for Pharmaceuticals deployments include:
- Cleanroom differential pressure, temperature and humidity monitoring to GMP Annex 1
- Cold store and stability-chamber monitoring for vaccines and biologics
- Continuous environmental monitoring with time-stamped, tamper-evident audit trails
- Fridge and freezer excursion alarms for API and finished-product stores
- Compressed air, purified water and utility condition monitoring
- GDP temperature logging across warehouse racking and distribution
LoRaWAN sensors and gateways for Pharmaceuticals & life sciences
The Industrial IoT for Pharmaceuticals hardware below is UK-stocked and dispatched nationwide. Every device joins the same five-layer stack, so you can start with one gateway and a handful of sensors and scale without re-platforming.
TS101Insertion temperature sensorLoRaWAN insertion probe for pipe, tank and process temperature.
EM300Leak / contact / T+RH sensorCompact EM300 series for door, leak, temperature and humidity monitoring.
AM103Indoor air-quality sensorCO2, temperature and humidity in one LoRaWAN sensor for offices, wards and plant rooms.
UG65Semi-industrial LoRaWAN gateway8-channel indoor gateway backhauling hundreds of LoRaWAN sensors over Ethernet, Wi-Fi or cellular.
WS101Smart buttonOne-press LoRaWAN button for call-for-service, andon and issue reporting.
EM500Outdoor environmental sensorRugged EM500 series for outdoor CO2, level, pressure and soil measurement.
Compliance and drivers in Pharmaceuticals & life sciences
The MHRA enforces Good Manufacturing Practice (GMP) and Good Distribution Practice (GDP); manufacturers and wholesale dealers hold MHRA licences and face risk-based inspections that examine storage areas and temperature monitoring. EU and UK GMP Annex 1 sets environmental monitoring expectations for sterile products, and the MHRA expects temperature mapping to demonstrate uniformity within plus or minus 2 degrees C, with at least one calibrated data logger per consignment.
Indiott builds the monitoring and evidence layer around those duties: continuous data, threshold alarms that reach the duty engineer by SMS, and timestamped records you can hand to an auditor. Useful references: GOV.UK: Life Sciences Sector Plan GOV.UK / MHRA: Good manufacturing practice and good distribution practice. The stacks pharmaceuticals & life sciences teams reach for most:
Why Pharmaceuticals & life sciences teams choose Indiott
Here is why pharmaceuticals & life sciences operators pick Indiott as their Industrial IoT for Pharmaceuticals partner rather than a generic reseller.
UK stock, UK delivery
Milesight, Atop and AquaIoT hardware supplied from the UK, typically dispatched within 14 working days nationwide.
Engineer-led, not box-shifting
An engineer scopes every enquiry and returns a costed bill of materials within one working day.
One stack, many brands
Interoperable sense, connect, secure, control and manage layers, so you are never locked to a single vendor.
Bespoke when off-the-shelf ends
When the device you need does not exist, we design and build it — firmware, enclosure and integration.
Industrial IoT for Pharmaceuticals: frequently asked questions
Can wireless monitoring support an MHRA inspection?
Yes. Continuous data with alarms and a tamper-evident audit trail is exactly what inspectors review for storage and temperature control under GMP and GDP, and it removes the gaps that manual logging leaves.
Do you cover Annex 1 cleanroom monitoring?
Sensors cover differential pressure, temperature and humidity, and feed a dashboard that holds the continuous records Annex 1 environmental monitoring expects for graded areas, with alerts if a room drifts out of limits.
Is temperature mapping supported?
Yes. Multi-point logging demonstrates uniformity within the plus or minus 2 degrees C the MHRA expects for stores and stability chambers, and produces the reports that go into a validation file.
Scope your Pharmaceuticals & life sciences project
Tell us the asset, the site and the constraint. An Indiott engineer maps it to the right Industrial IoT for Pharmaceuticals stack and sends an itemised quote within one working day.
Related: Industrial IoT for Cold chain · Industrial IoT for Healthcare · Industrial IoT for Manufacturing
Next step
Scope it with an engineer.
Tell us the site, the assets and the constraint. You get a bill of materials and a straight answer within one working day.
- A bill of materials sized to your site
- Priced ex VAT, UK entity, no login wall
Rather talk it through? Call 023 9223 3611
Received. An engineer has it.
You will hear back within one working day with the parts, the prices and the lead time. A confirmation is on its way to your inbox.
If it is urgent, call 023 9223 3611.
Industrial IoT in other sectors
Buying guides